Wheel opening molding. Fuel filler door

Wheel opening molding

REMOVAL

(1) Remove the screws attaching the wheel opening molding to the fender (Fig. 64).

(2) Separate the molding from the wheel opening.

INSTALLATION

(1) Clean body surface with MOPAR Super Kleen solvent or equivalent. Wipe surface dry with lint free cloth.

Fig. 63 Body Side Moldings

1 - MOLDING

(2) Position the molding in the wheel opening.

(3) Remove the backing and press to secure molding.

(4) Install the screws attaching the wheel opening molding to the fender.

Fig. 64 Wheel Opening Molding

1 - REAR WHEEL OPENING MOLDING

2 - DOOR LIP MOLDING

3 - FRONT WHEEL OPENING MOLDING

REMOVAL

(1) Open the fuel filler door.

(2) Remove the screws attaching the door to the quarter panel (Fig. 65).

(3) Remove the door from the panel.

Fig. 65 Fuel Filler Door

1 - FUEL DOOR

INSTALLATION

(1) Position the fuel filler door on the quarter panel with the screw holes aligned.

(2) Install the screws attaching the fuel filler door to the quarter panel.