The 2nd row seat latches are serviced as a set.
REMOVAL
(1) Remove seat back.
(2) Disengage J-straps on seat cushion frame (Fig.
10).
(3) Remove bolts attaching outboard tumble latch to seat cushion frame.
(4) Remove bolts attaching inboard tumble latch to seat cushion frame.
(5) Remove bolts attaching floor latch to seat cushion frame (Fig. 11).
(6) Disengage latch cable from inboard tumble latch.
(7) Separate latches from seat cushion frame.
Fig. 10 Seat J-Strap
1 - OUTBOARD TUMBLE LATCH
2 - SEAT CUSHION
3 - J-STRAP
Fig. 11 Floor Latch
1 - INBOARD TUMBLE LATCH
2 - FLOOR LATCH
INSTALLATION
(1) Position latches on seat cushion frame.
(2) Route latch cables through seat frame and engage latch cable to inboard tumble latch.
(3) Install bolts attaching floor latch to seat cushion frame (Fig. 11). Tighten bolts to 27 N*m (19 ft.
lbs.) torque.
(4) Install bolts attaching inboard tumble latch to seat cushion frame. Tighten bolt located in round hole first than bolt located in the slotted hole.
Tighten bolts to 27 N*m (19 ft. lbs.) torque (5) Install bolts attaching outboard tumble latch to seat cushion frame. Tighten bolt located in round hole first than bolt located in the slotted hole.
Tighten bolts to 27 N*m (19 ft. lbs.) torque.
(6) Engage J-straps on seat cushion frame (Fig.
10).
(7) Install seat back.