2Nd row center seat back cover. 3Rd row seat cushion cover
REMOVAL (1) Remove center seat back.
(2) Disengage J-straps on bottom.
(3) Remove hook and loop fasteners on left and
right side.
1 - 2ND ROW CENTER SEAT BACK 2 - HINGE (4) Remove the cup holder.
(5) Roll cover off seat back. INSTALLATION (1) Position cover on seat back.
(2) Engage J-straps.
(3) Install center seat back.
(4) Engage hook and loop fasteners.
(5) Install the cup holder. NOTE: The cushion cover is bonded to the seat
foam cushion. REMOVAL (1) Lift and rotate seat cushion forward.
(2) Disengage J-straps on underside of seat.
(3) Disengage J-straps on each side of seat.
(4) Separate cover/cushion from seat frame. INSTALLATION (1) Position cover/cushion on seat frame.
(2) Engage J-straps on each side of seat.
(3) Engage J-straps on underside of seat.
(4) Return seat to seating position.2Nd row center seat back cover
Fig. 14 2nd Row Center Seat Back
3Rd row seat cushion cover
Dodge Durango (DN) 1998-2003 Service Manual
- Lubrication and Maintenance
- Suspension
- Differential and Driveline
- Brakes
- Cooling System
- Battery
- Starting Systems
- Charging System
- Ignition System
- Instrument Panel Systems
- Audio Systems
- Horn Systems
- Speed Control System
- Turn Signal and Hazard Warning Systems
- Wiper and Washer Systems
- Lamps
- Passive Restraint Systems
- Electrically Heated Systems
- Power Distribution System
- Power Lock Systems
- Vehicle Theft/Security Systems
- Power Seat System
- Power Window Systems
- Power Mirror Systems
- Chime/Buzzer Warning Systems
- Overhead Console Systems
- Engine
- Exhaust System
- Frame and Bumpers
- Fuel System
- Steering
- Transmission and Transfer Case
- Tires and Wheels
- Body
- Heating and Air Conditioning
- Emission Control Systems
- Introduction