Rear door outer belt weatherstrip. Rear door opening weatherstrip
Rear door outer belt weatherstrip
REMOVAL
(1) Lower glass.
(2) Lift corner of weatherstrip upward and remove weatherstrip from outer door panel (Fig. 53).
Fig. 53 Inner/Outer Belt Weatherstrip
1 - OUTER BELT WEATHERSTRIP
2 - INNER BELT WEATHERSTRIP
INSTALLATION
(1) Position weatherstrip on outer door panel (Fig.
53).
(2) Press into place.
(3) Raise glass.
Rear door opening weatherstrip
REMOVAL
(1) Remove door sill trim.
(2) Loosen upper and lower B-pillar trim to access weatherstrip.
(3) Remove C-pillar trim.
(4) Pull quarter panel trim outward to access weatherstrip.
(5) Pull weatherstrip from pinch flange around door opening (Fig. 54).
INSTALLATION
(1) Clean pinch flange (2) Position the weatherstrip on the pinch flange around door opening and press into place.
(3) Install quarter panel trim.
(4) Install C-pillar trim.
(5) Install B-pillar trim.
(6) Install door sill trim. Ensure the clips attaching the sill trim to the door sill are fully seated.
(7) Install A-pillar trim.