REMOVAL
(1) Remove B-pillar trim.
(2) Disconnect door wire harness connector.
(3) Support door on suitable stand.
(4) Using a wax crayon or equivalent, mark hinge position on B-pillar.
(5) Remove bolts attaching hinge to B-pillar (Fig.
47).
INSTALLATION
(1) Align and position door on vehicle.
(2) Install bolts attaching hinge to B-pillar (Fig.
47). Tighten bolts to 28 N*m (20 ft. lbs.) torque.
(3) Connect door wire harness connector.
(4) Install B-pillar trim.
Fig. 47 Rear Door Hinge
1 - B-PILLAR
2 - LOWER HINGE
3 - UPPER HINGE