Dodge Durango

 Service Manual

Fuel System » Fuel injection system » Description and operation
Ccd bus (+/-) circuits-pcm outputs

OPERATION

The Powertrain Control Module (PCM) sends certain output signals through the CCD bus circuits.

These signals are used to control certain instrument panel located items and to determine certain identification numbers.

Refer to Group 8E, Instrument Panel and Gauges for additional information.

Powertrain control module (pcm)

Modes of operation

Automatic shutdown (asd) relay sense-pcm input

Battery voltage-pcm input

Brake switch-pcm input

Engine coolant temperature sensor-pcm input

Five volt sensor supplies-primary and secondary

Ignition circuit sense-pcm input

Intake manifold air temperature sensor-pcm input

Manifold absolute pressure (map) sensor-pcm input

Oil pressure sensor-pcm input

Oxygen sensor (o2s)-pcm input

Power grounds

Power steering pressure switch- pcm input

Sensor return-pcm input

Throttle position sensor (tps)-pcm input

Vehicle speed and distance-pcm input

Auto shutdown (asd) relay-pcm output

Ccd bus (+/-) circuits-pcm outputs

Data link connector-pcm input and output

Fuel injectors-pcm output

Fuel pump relay-pcm output

Idle air control (iac) motor-pcm output

Oxygen sensor heater relays-pcm output

Radiator cooling fan relay-pcm output

Throttle body