REMOVAL
(1) Remove seat.
(2) Adjust the seat track to gain access to the torx bolts attaching the seat track to the cushion frame.
(3) Remove the torx bolts.
Fig. 1 Towel Bar
1 - TOWEL BAR
2 - CUSHION FRAME
3 - PIVOT STUD
4 - UNTHREADED STUD RETAINERS
(4) Remove the unthreaded stud retainers from the towel bar.
(5) Separate the seat track from the frame.
INSTALLATION
(1) Position the seat track on the frame.
(2) Install the unthreaded stud retainers on the towel bar.
(3) Install the torx bolts attaching the seat track to the cushion frame. Tighten the bolts in sequence (Fig. 2) to 24 N*m (17 ft. lbs.) torque.
(4) Install seat.
Fig. 2 Bucket Seat Track
Bucket seat back
The bucket seat back frame, seat cushion frame and recliner mechanism is serviced as a complete assembly. Refer to the Bucket Seat Cushion/Cover and Bucket Seat Back Pad/Cover for service procedures.