Toyota
Dodge Durango
 Owners Manual
What to do in emergencies » Jacking and tire changing
Spare Tire Removal

  1. Remove the jack tools from the bag.
  2.  Raise the rubber mat and remove the plug from storage compartment floor.
  3.  Fit the jack handle extension over the drive nut. Use the lug wrench handle and extension to completely lower the spare tire. Keep turning the handle until the winch stops.

Lowering/Raising Spare Tire Lowering/Raising Spare Tire

  1. Slide the tire out from under the vehicle and rotate it vertically behind the rear bumper.

Spare Tire Spare Tire

  1. Spread the retaining tabs on the plastic plate and pull the metal stamping toward you to release it from the plastic plate.

Tab Location Tab Location

  1. Slide the metal stamping up the steel extension tube and winch cable. Rotate the metal stamping and push it through the hole in the plastic plate and wheel.

Sleeve And Cable Sleeve And Cable

  1. Pinch the three short and two long tubes to remove the protective plate from the steel spare wheel.

Releasing Protective Plate Releasing Protective Plate

    More about «Jacking and tire changing»:

    Jack Location

    Spare Tire Stowage

    Spare Tire Removal

    Preparations For Jacking

    Jacking Instructions

    Road Tire Installation

    Dodge Durango Owners Manual / What to do in emergencies / Jacking and tire changing / Spare Tire Removal

    Dodge Durango Owners Manual

    Categories


    © 2017-2024 Copyright www.dodurango.net
    0.006