Jack Location. Spare Tire Stowage
The scissor-type jack and tire changing tools are located
in rear cargo area, below the load floor.
Rotate the plastic thumb screw on the end of the jack to
loosen the jack and remove from the bracket.
The spare tire is stowed under the rear of the vehicle by
means of a cable winch mechanism. To remove or stow
the spare, use the jack handle/lug wrench connected to
the square socket extension to rotate the "spare tire
drive" nut. The nut is located under a plastic cover at the
center-rear of the cargo floor area, just inside the liftgate
opening.
Jack Location
Jack Storage Location
Thumb Screw Location
Spare Tire Stowage
Spare Tire Location
CAUTION!
Do not use power tools to winch the tire up or down. Impact type tools can damage the winch mechanism.