Adaptive Cruise Control (ACC) Operation. Activating Adaptive Cruise Control (ACC)

Adaptive Cruise Control (ACC) Operation

The speed control buttons (located on the right side of the steering wheel) operates the ACC system.

Adaptive Cruise Control Buttons Adaptive Cruise Control Buttons

1 - Normal (Fixed Speed) Cruise Control On/Off
2 - SET+/Accel
3 - RES/Resume
4 - SET-/Decel
5 - Distance Setting Increase 6 - Adaptive Cruise Control (ACC) On/Off
7 - Distance Setting Decrease 8 - CANC/Cancel

NOTE: Any chassis/suspension or tire size modifications to the vehicle will effect the performance of the Adaptive Cruise Control and Forward Collision Warning System.

Activating Adaptive Cruise Control (ACC)

You can only engage ACC if the vehicle speed is above 0 mph (0 km/h).

The minimum Set Speed for the ACC system is 20 mph (32 km/h).

When the system is turned on and in the READY state, the Driver Information Display (DID) displays "ACC Ready." When the system is OFF, the DID displays "Adaptive Cruise Control (ACC) Off."

NOTE: You cannot engage ACC under the following conditions:

  •  When you apply the brakes.
  •  When the parking brake is set.
  • When the automatic transmission is in PARK, REVERSE or NEUTRAL.
  •  When the Vehicle speed is outside of the speed range.
  •  When the brakes are overheated.
  •  When the driver door is open.
  •  When the driver seat belt is unbuckled.

    Dodge Durango (WD) 2011-2024 Owners Manual


    © 2017-2024 Copyright