Toyota
Dodge Durango
 Owners Manual
Understanding your instrument panel » Warning and indicator lights
Yellow Telltale Indicator Lights

Engine Check/Malfunction Indicator Light (MIL)

Yellow Telltale Light

What It Means

Engine Check/Malfunction Indicator Light (MIL)

Engine Check/Malfunction Indicator Light (MIL) The Engine Check/Malfunction Indicator Light (MIL) is a part of an Onboard Diagnostic System called OBD II that monitors engine and automatic transmission control systems. The light will illuminate when the ignition is in the ON position before engine start. If the bulb does not come on when turning the key from OFF to ON/RUN, have the condition checked promptly. Certain conditions, such as a loose or missing gas cap, poor quality fuel, etc., may illuminate the light after engine start. The vehicle should be serviced if the light stays on through several typical driving styles. In most situations, the vehicle will drive normally and will not require towing. When the engine is running, the MIL may flash to alert serious conditions that could lead to immediate loss of power or severe catalytic converter damage. The vehicle should be serviced as soon as possible if this occurs.

 

WARNING! A malfunctioning catalytic converter, as referenced above, can reach higher temperatures than in normal operating conditions. This can cause a fire if you drive slowly or park over flammable substances such as dry plants, wood, cardboard, etc. This could result in death or serious injury to the driver, occupants or others.

 

CAUTION! Prolonged driving with the Malfunction Indicator Light (MIL) on could cause damage to the engine control system. It also could affect fuel economy and driveability. If the MIL is flashing, severe catalytic converter damage and power loss will soon occur. Immediate service is required.

Electronic Stability Control (ESC) Indicator Light - If Equipped

Yellow Telltale Light

What It Means

Electronic Stability Control (ESC) Indicator Light - If

Electronic Stability Control (ESC) Indicator Light - If Equipped
The "ESC Indicator Light" in the instrument cluster will come on when the ignition is placed in the ON/RUN position, and when ESC is activated. It should go out with the engine running. If the "ESC Indicator Light" comes on continuously with the engine running, a malfunction has been detected in the ESC system. If this light remains on after several ignition cycles, and the vehicle has been driven several miles (kilometers) at speeds greater than 30 MPH (48 km/h), see your authorized dealer as soon as possible to have the problem diagnosed and corrected.
  •  The "ESC Off Indicator Light" and the "ESC Indicator Light" come on momentarily each time the ignition is placed in the ON/RUN position.
  •  Each time the ignition is turned to ON/RUN, the ESC system will be ON, even if it was turned off previously.
  •  The ESC system will make buzzing or clicking sounds when it is active. This is normal; the sounds will stop when ESC becomes inactive.
  •  This light will come on when the vehicle is in an ESC event

Electronic Stability Control (ESC) OFF Indicator Light - If Equipped

Yellow Telltale Light

What It Means

Electronic Stability Control (ESC) OFF Indicator Light - If

Electronic Stability Control (ESC) OFF Indicator Light - If Equipped
This light indicates the Electronic Stability Control (ESC) is off.

Low Washer Fluid Indicator Light - If Equipped

Yellow Telltale Light

What It Means

Low Washer Fluid Indicator Light - If Equipped

Low Washer Fluid Indicator Light - If Equipped This indicator will illuminate when the windshield washer fluid is low.

Tire Pressure Monitoring Indicator Light

Yellow Telltale Light

What It Means

Tire Pressure Monitoring Indicator Light

Tire Pressure Monitoring Indicator Light The warning light switches on and a message is displayed to indicate that the tire pressure is lower than the recommended value and/or that slow pressure loss is occurring. In these cases, optimal tire duration and fuel consumption may not be guaranteed. Should one or more tires be in the condition mentioned above, the display will show the indications corresponding to each tire in sequence.

IMPORTANT: Do not continue driving with one or more flat tires as handling may be compromised. Stop the vehicle, avoiding sharp braking and steering. Repair immediately using the dedicated tire repair kit and contact your authorized dealership as soon as possible.

Each tire, including the spare (if provided), should be checked monthly when cold and inflated to the inflation pressure recommended by the vehicle manufacturer on the vehicle placard or tire inflation pressure label. If your vehicle has tires of a different size than the size indicated on the vehicle placard or tire inflation pressure label, you should determine the proper tire inflation pressure for those tires.

As an added safety feature, your vehicle has been equipped with a Tire Pressure Monitoring System (TPMS) that illuminates a low tire pressure telltale when one or more of your tires is significantly under-inflated.

Accordingly, when the low tire pressure telltale illuminates, you should stop and check your tires as soon as possible and inflate them to the proper pressure. Driving on a significantly under-inflated tire causes the tire to overheat and can lead to tire failure. Under-inflation also reduces fuel efficiency and tire tread life, and may affect the vehicle's handling and stopping ability.

Please note that the TPMS is not a substitute for proper tire maintenance, and it is the driver's responsibility to maintain correct tire pressure, even if under-inflation has not reached the level to trigger illumination of the TPMS low tire pressure telltale.

Your vehicle has also been equipped with a TPMS malfunction indicator to indicate when the system is not operating properly. The TPMS malfunction indicator is combined with the low tire pressure telltale. When the system detects a malfunction, the telltale will flash for approximately one minute and then remain continuously illuminated. This sequence will continue upon subsequent vehicle start-ups as long as the malfunction exists.

When the malfunction indicator is illuminated, the system may not be able to detect or signal low tire pressure as intended. TPMS malfunctions may occur for a variety of reasons, including the installation of replacement or alternate tires or wheels on the vehicle that prevent the TPMS from functioning properly. Always check the TPMS malfunction telltale after replacing one or more tires or wheels on your vehicle, to ensure that the replacement or alternate tires and wheels allow the TPMS to continue to function properly

CAUTION! The TPMS has been optimized for the original equipment tires and wheels. TPMS pressures and warning have been established for the tire size equipped on your vehicle. Undesirable system operation or sensor damage may result when using replacement equipment that is not of the same size, type, and/or style. Aftermarket wheels can cause sensor damage. Using aftermarket tire sealants may cause the Tire Pressure Monitoring System (TPMS) sensor to become inoperable. After using an aftermarket tire sealant it is recommended that you take your vehicle to an authorized dealership to have your sensor function checked.

Low Fuel Indicator Light

Yellow Telltale Light

What It Means

Low Fuel Indicator Light

Low Fuel Indicator Light When the fuel level reaches approximately 2 gal (7.5 L) this light will turn on, and remain on until fuel is added

Anti-Lock Brake (ABS) Indicator Light

Yellow Telltale Light

What It Means

Anti-Lock Brake (ABS) Indicator Light

Anti-Lock Brake (ABS) Indicator Light This light monitors the Anti-Lock Brake System (ABS). The light will turn on when the ignition is placed in the ON/RUN position and may stay on for as long as four seconds. If the ABS light remains on or turns on while driving, then the Anti-Lock portion of the brake system is not functioning and service is required. However, the conventional brake system will continue to operate normally if the brake warning light is not on. If the ABS light is on, the brake system should be serviced as soon as possible to restore the benefits of Anti-Lock Brakes. If the ABS light does not turn on when the ignition is placed in the ON/RUN position, have the light inspected by an authorized dealer.

Service Forward Collision Warning Fault Indicator Light - If Equipped

Yellow Telltale Light

What It Means

Service Forward Collision Warning Fault Indicator Light - If

Service Forward Collision Warning Fault Indicator Light - If Equipped
This telltale will turn on to indicate a fault in the Forward Collision Warning System. Contact your local authorized dealer for service.

Forward Collision Warning Off Indicator Light - If Equipped

Yellow Telltale Light

What It Means

Forward Collision Warning Off Indicator Light - If Equipped

Forward Collision Warning Off Indicator Light - If Equipped This light indicates the Forward Collision Warning is off.

Service Adaptive Cruise Control Light - If Equipped

Yellow Telltale Light

What It Means

Service Adaptive Cruise Control Light - If Equipped

Service Adaptive Cruise Control Light - If Equipped This light will turn on when the ACC is not operating and needs service. For further information, refer to "Adaptive Cruise Control (ACC)" in "Understanding The Features Of Your Vehicle."

AWD Low Indicator Light - If Equipped

Yellow Telltale Light

What It Means

AWD Low Indicator Light

AWD Low Indicator Light This light alerts the driver that the vehicle is in the all-wheel drive LOW mode. The front and rear driveshafts are mechanically locked together forcing the front and rear wheels to rotate at the same speed. AWD LOW is designed for loose, slippery road surfaces only. Refer to "All Wheel Drive Operation" in "Starting And Operating" for further information on all-wheel drive operation and proper use.

Service AWD Indicator Light - If Equipped

Yellow Telltale Light

What It Means

Service AWD Indicator Light - If Equipped

Service AWD Indicator Light - If Equipped This telltale will turn on to indicate the All Wheel Drive (AWD) system is not functioning properly and that service is required. Contact your authorized dealership.

Service Stop/Start System Indicator Light - If Equipped

Yellow Telltale Light

What It Means

Service Stop/Start System Indicator Light - If Equipped

Service Stop/Start System Indicator Light - If Equipped This telltale will turn on to indicate the Stop/Start system is not functioning properly and service is required.

LaneSense Indicator Light - If Equipped

Yellow Telltale Light

What It Means

LaneSense Indicator Light - If Equipped

LaneSense Indicator Light - If Equipped The LaneSense is solid yellow when the system senses a lane drift situation. The LaneSense is flashing yellow when the system senses the lane has been approached and is in a lane departure situation. Refer to "LaneSense - If Equipped in "Understanding The Features Of Your Vehicle" for further information.

LaneSense Failure Indicator Light - If Equipped

Yellow Telltale Light

What It Means

LaneSense Failure Indicator Light

LaneSense Failure Indicator Light This light will turn on when the LaneSense system is not operating and needs service. Please see your authorized dealer.
    More about «Warning and indicator lights»:

    Red Telltale Indicator Light

    Yellow Telltale Indicator Lights

    Green Telltale Indicator Lights

    White Telltale Indicator Lights

    Blue Telltale Indicator Lights

    Dodge Durango Owners Manual / Understanding your instrument panel / Warning and indicator lights / Yellow Telltale Indicator Lights

    Dodge Durango Owners Manual

    Categories


    © 2017-2024 Copyright www.dodurango.net
    0.0071