REMOVAL
(1) Remove the screws attaching the wheel opening molding to the fender (Fig. 64).
(2) Separate the molding from the wheel opening.
INSTALLATION
(1) Clean body surface with MOPAR Super Kleen solvent or equivalent. Wipe surface dry with lint free cloth.
Fig. 63 Body Side Moldings
1 - MOLDING
(2) Position the molding in the wheel opening.
(3) Remove the backing and press to secure molding.
(4) Install the screws attaching the wheel opening molding to the fender.
Fig. 64 Wheel Opening Molding
1 - REAR WHEEL OPENING MOLDING
2 - DOOR LIP MOLDING
3 - FRONT WHEEL OPENING MOLDING