Toyota
Dodge Durango
 Service Manual
Lamps » Lamp service » Removal and installation
Underhood lamp

REMOVAL

(1) Disconnect the wire harness connector from the lamp.

(2) Remove lamp lens.

(3) Remove bulb.

(4) Remove screw attaching underhood lamp to the inner hood panel (Fig. 9).

(5) Separate underhood lamp from vehicle.

Fig. 9 Underhood Lamp Removal Fig. 9 Underhood Lamp Removal

1 - HOOD

2 - UNDERHOOD LAMP

INSTALLATION

(1) Install bulb.

(2) Install lamp lens.

(3) Position the underhood lamp on the hood inner panel.

(4) Install the attaching screw through the lamp and into the hood panel (Fig. 9). Tighten the screw securely.

(5) Fold lamp housing over and firmly press onto base to snap into place.

(6) Connect the wire harness connector to the lamp.

    More about «Removal and installation»:

    Headlamp

    Fog lamp

    Park, turn signal and side marker lamp

    Center high mounted stop lamp (chmsl)

    Liftgate/cargo lamp

    Tail, brake, turn signal and back-up lamp

    License plate lamp

    Underhood lamp

    Dome lamp

    2Nd seat dome/reading lamp

    Overhead console reading lamp

    Dodge Durango Service Manual / Lamps / Lamp service / Removal and installation / Underhood lamp

    Dodge Durango Service Manual

    Categories


    © 2017-2024 Copyright www.dodurango.net
    0.0081