Dodge Durango

 Owners Manual

Things to know before starting your vehicle » Remote starting system - if equipped
To Enter Remote Start Mode

Push and release the REMOTE START button on the key fob twice within five seconds. The vehicle doors will lock, the parking lights will flash, and the horn will chirp twice (if programmed). Then, the engine will start, and the vehicle will remain in the Remote Start mode for a 15-minute cycle.

NOTE:

•  If an engine fault is present or fuel level is low, the vehicle will start and then shut down in 10 seconds.
•  The park lamps will turn on and remain on during Remote Start mode.
•  For security, power window and power sunroof operation (if equipped) are disabled when the vehicle is in the Remote Start mode.
•  The engine can be started two consecutive times with the key fob. However, the ignition must be cycled by pushing the START/STOP button twice (or the ignition switch must be cycled to the ON/RUN position) before you can repeat the start sequence for a third cycle.

How To Use Remote Start

Remote Start Abort Message On Driver Information Display (DID) - If Equipped

To Enter Remote Start Mode

To Exit Remote Start Mode Without Driving The Vehicle

To Exit Remote Start Mode And Drive The Vehicle

Remote Start Comfort Systems - If Equipped

General Information