Dodge Durango

 Service Manual

Overhead Console Systems » Removal and installation
Sunglasses storage bin

REMOVAL

(1) Disconnect and isolate the battery negative cable.

(2) Remove the reading and courtesy lamp housing from the overhead console. Refer to Overhead Console Reading and Courtesy Lamp Housing in the Removal and Installation section of this group for the procedures.

(3) Unlatch and remove the sunglasses storage bin from the overhead console housing.

INSTALLATION

(1) Position the sunglasses storage bin into the overhead console housing.

(2) Engage the latch of the sunglasses storage bin with the latch striker on the rear of the storage bin opening in the overhead console housing.

(3) Be certain that the sunglasses storage bin pivot shaft is located in the two pivot receptacles just behind the reading and courtesy lamp lenses in the overhead console housing.

(4) Be certain that the sunglasses storage bin damper spring is installed on the pivot shaft with the two end tabs of the spring engaged with the flats on the rear of the shaft, and the center tab engaged over the front of the shaft.

(5) Install the reading and courtesy lamp housing onto the overhead console. Refer to Overhead Console Reading and Courtesy Lamp Housing in the Removal and Installation section of this group for the procedures.

(6) Reconnect the battery negative cable.

Overhead console reading and courtesy lamp lens

Overhead console

Paperclip

Compass mini-trip computer

Overhead console reading and courtesy lamp housing

Sunglasses storage bin

Garage door opener storage bin door

Ambient temperature sensor