Toyota
Dodge Durango
 Service Manual
Differential and Driveline » 8 1/4 And 9 1/4 axle » Description and operation
Standard differential

DESCRIPTION

The differential gear system divides the torque between the axle shafts. It allows the axle shafts to rotate at different speeds when turning corners.

Each differential side gear is splined to an axle shaft. The pinion gears are mounted on a pinion mate shaft and are free to rotate on the shaft. The pinion gear is fitted in a bore in the differential case and is positioned at a right angle to the axle shafts.

OPERATION

In operation, power flow occurs as follows:

  • The pinion gear rotates the ring gear
  • The ring gear (bolted to the differential case) rotates the case
  • The differential pinion gears (mounted on the pinion mate shaft in the case) rotate the side gears
  • The side gears (splined to the axle shafts) rotate the shafts

During straight-ahead driving, the differential pinion gears do not rotate on the pinion mate shaft. This occurs because input torque applied to the gears is divided and distributed equally between the two side gears. As a result, the pinion gears revolve with the pinion mate shaft but do not rotate around it (Fig. 5).

Fig. 5 Differential Operation-Straight Ahead Driving Fig. 5 Differential Operation-Straight Ahead Driving

1 - IN STRAIGHT AHEAD DRIVING EACH WHEEL ROTATES AT 100% OF CASE SPEED

2 - PINION GEAR

3 - SIDE GEAR

4 - PINION GEARS ROTATE WITH CASE

When turning corners, the outside wheel must travel a greater distance than the inside wheel to complete a turn. The difference must be compensated for to prevent the tires from scuffing and skidding through turns. To accomplish this, the differential allows the axle shafts to turn at unequal speeds (Fig.

6). In this instance, the input torque applied to the pinion gears is not divided equally. The pinion gears now rotate around the pinion mate shaft in opposite directions. This allows the side gear and axle shaft attached to the outside wheel to rotate at a faster speed.

Fig. 6 Differential Operation-On Turns Fig. 6 Differential Operation-On Turns

1 - PINION GEARS ROTATE ON PINION SHAFT

    More about «Description and operation»:

    8 1/4 Axle

    9 1/4 Axles

    Lubricant

    Standard differential

    Trac-loky differential

    Dodge Durango Service Manual / Differential and Driveline / 8 1/4 And 9 1/4 axle / Description and operation / Standard differential

    Dodge Durango Service Manual

    Categories


    © 2017-2024 Copyright www.dodurango.net
    0.0208