Toyota
Dodge Durango
 Owners Manual
Understanding the features of your vehicle » Parksense rear park assist - if equipped
Service The ParkSense Rear Park Assist System

During vehicle start up, when the ParkSense Rear Park Assist System has detected a faulted condition, the instrument cluster will actuate a single chime, once per ignition cycle, and it will display the "PARKSENSE UNAVAILABLE WIPE REAR SENSORS" or the "PARKSENSE UNAVAILABLE SERVICE REQUIRED" message. Refer to "Driver Information Display (DID)" for further information. When the gear selector is moved to REVERSE and the system has detected a faulted condition, the DID will display the PARKSENSE UNAVAILABLE WIPE REAR SENSORS or PARKSENSE UNAVAILABLE SERVICE REQUIRED message for as long as the vehicle is in REVERSE. Under this condition, ParkSense will not operate.

If "PARKSENSE UNAVAILABLE WIPE REAR SENSORS" appears in the Driver Information Display (DID) make sure the outer surface and the underside of the rear fascia/bumper is clean and clear of snow, ice, mud, dirt or other obstruction and then cycle the ignition. If the message continues to appear, see an authorized dealer.

If "PARKSENSE UNAVAILABLE SERVICE REQUIRED" appears in the DID, see an authorized dealer.

Cleaning The ParkSense System

Clean the ParkSense sensors with water, car wash soap and a soft cloth. Do not use rough or hard cloths. Do not scratch or poke the sensors. Otherwise, you could damage the sensors.

    More about «Parksense rear park assist - if equipped»:

    ParkSense Sensors

    ParkSense Warning Display

    ParkSense Display

    Enabling And Disabling ParkSense

    Service The ParkSense Rear Park Assist System

    ParkSense System Usage Precautions

    Dodge Durango Owners Manual / Understanding the features of your vehicle / Parksense rear park assist - if equipped / Service The ParkSense Rear Park Assist System

    Dodge Durango Owners Manual

    Categories


    © 2017-2024 Copyright www.dodurango.net
    0.0211