Toyota
Dodge Durango
 Service Manual
Brakes » Rear wheel antilock brakes » Diagnosis and testing
Rwal service precautions

The RWAL uses an electronic control module, the CAB. This module is designed to withstand normal current draws associated with vehicle operation.

Care must be taken to avoid overloading the CAB circuits. In testing for open or short circuits, do not ground or apply voltage to any of the circuits unless instructed to do so for a diagnostic procedure. These circuits should only be tested using a high impedance multi-meter or the DRB tester as described in this section. Power should never be removed or applied to any control module with the ignition in the ON position. Before removing or connecting battery cables, fuses, or connectors, always turn the ignition to the OFF position.

CAUTION: Use only factory wiring harnesses. Do not cut or splice wiring to the brake circuits. The addition of after-market electrical equipment (car phone, radar detector, citizen band radio, trailer lighting, trailer brakes, ect.) on a vehicle equipped with antilock brakes may affect the function of the antilock brake system.

    More about «Diagnosis and testing»:

    Rear wheel antilock

    Rwal service precautions

    Dodge Durango Service Manual / Brakes / Rear wheel antilock brakes / Diagnosis and testing / Rwal service precautions

    Dodge Durango Service Manual

    Categories


    © 2017-2024 Copyright www.dodurango.net
    0.0061