Dodge Durango Service ManualPower Mirror Systems » Interior mirrors
Removal and installation
Dodge Durango
Service Manual
Removal and installation
Automatic day/night mirror
(1) Disconnect and isolate the battery negative cable.
(2) Unplug the wire harness connector from the automatic day/night mirror (Fig. 2).
Fig. 2 Automatic Day/Night Mirror Remove/Install
1 - ON/OFF SWITCH
2 - ELECTRICAL CONNECTOR
(3) Remove the set screw that secures the automatic day/night mirror to the windshield support button.
(4) Push the automatic day/night mirror upwards far enough for the mounting bracket to clear the support button and remove the mirror from the windshield support button.
(5) Reverse the removal procedures to install.
Tighten the mounting screw to 1.7 N*m (15 in. lbs.).
More about «Interior mirrors»:
General information
Description and operation
Diagnosis and testing
Removal and installation
Dodge Durango Service Manual
- Lubrication and Maintenance
- Suspension
- Differential and Driveline
- Brakes
- Cooling System
- Battery
- Starting Systems
- Charging System
- Ignition System
- Instrument Panel Systems
- Audio Systems
- Horn Systems
- Speed Control System
- Turn Signal and Hazard Warning Systems
- Wiper and Washer Systems
- Lamps
- Passive Restraint Systems
- Electrically Heated Systems
- Power Distribution System
- Power Lock Systems
- Vehicle Theft/Security Systems
- Power Seat System
- Power Window Systems
- Power Mirror Systems
- Chime/Buzzer Warning Systems
- Overhead Console Systems
- Engine
- Exhaust System
- Frame and Bumpers
- Fuel System
- Steering
- Transmission and Transfer Case
- Tires and Wheels
- Body
- Heating and Air Conditioning
- Emission Control Systems
- Introduction
Categories
© 2017-2024 Copyright www.dodurango.net
0.0211
0.0211