Dodge Durango

 Service Manual

Body » Stationary glass » Removal and installation
Quarter window glass

REMOVAL

(1) Remove quarter panel trim.

(2) Carefully pull down headliner to access upper nuts attaching quarter window glass to pinchweld and remove nuts.

(3) Remove nuts attaching quarter window glass to pinchweld (Fig. 7).

(4) Using razor knife, cut butyl sealer between the mounting studs attaching glass to pinchweld.

(5) Push glass from opening.

Fig. 7 Quarter Window Glass

1 - QUARTER GLASS

2 - STUD

3 - NUT

INSTALLATION

The pinchweld should be cleaned of all old butyl sealer.

(1) Apply 6 mm (0.25 in.) of butyl tape around perimeter of glass assembly encapsulation track.

Ensure the butyl tape is wrapped around the mounting studs.

(2) Place glass into opening and insert mounting studs through holes in pinchweld.

(3) Install nuts attaching quarter window glass to pinchweld. Tighten nuts to 4.5 N*m (40 in. lbs.) torque.

(4) Install interior trim.

Windshield

Rear door stationary glass

Quarter window glass

Liftgate backlite