Toyota
Dodge Durango
 Owners Manual
What to do in emergencies » Jacking and tire changing
Preparations For Jacking

  1. Park the vehicle on a firm, level surface as far from the edge of the roadway as possible. Avoid icy or slippery areas
WARNING! Do not attempt to change a tire on the side of the vehicle close to moving traffic, pull far enough off the road to avoid being hit when operating the jack or changing the wheel.
  1. Turn on the Hazard Warning flasher.
  2.  Set the parking brake.
  3.  Place the gear selector into PARK.
  4.  Turn OFF the ignition.
  5.  Block both the front and rear of the wheel diagonally opposite of the jacking position. For example, if changing the right front tire, block the left rear wheel.

NOTE: Passengers should not remain in the vehicle when the vehicle is being jacked.

    More about «Jacking and tire changing»:

    Jack Location

    Spare Tire Stowage

    Spare Tire Removal

    Preparations For Jacking

    Jacking Instructions

    Road Tire Installation

    Dodge Durango Owners Manual / What to do in emergencies / Jacking and tire changing / Preparations For Jacking

    Dodge Durango Owners Manual

    Categories


    © 2017-2024 Copyright www.dodurango.net
    0.0059