(1) Disconnect and isolate the battery negative cable.
(2) Pull the power mirror switch control knob rearward to remove it from the switch stem (Fig. 4).
(3) Remove the nut that secures the power mirror switch to the driver side door trim panel (Fig. 5).
Fig. 4 Power Mirror Switch Control Knob Remove/ Install - Typical
1 - SWITCH CONTROL KNOB
2 - DOOR TRIM PANEL
3 - POWER MIRROR SWITCH
Fig. 5 Power Mirror Switch Nut - Typical
1 - SWITCH RETAINING NUT
2 - DOOR TRIM PANEL
3 - POWER MIRROR SWITCH
(4) Remove the trim panel from the inside of the driver side front door. Refer to Group 23 - Body for the procedures.
(5) Pull the trim panel away from the inner door panel far enough to access the power mirror switch wire harness connector.
(6) Unplug the power mirror switch wire harness connector (Fig. 6).
Fig. 6 Door Trim Panel Wire Harness Connectors
1 - POWER MIRROR SWITCH
2 - TWEETER
3 - POWER WINDOW SWITCH
4 - WIRE HARNESS CONNECTOR
(7) Remove the power mirror switch from the back of the door trim panel.
(8) Reverse the removal procedures to install.