The IAC motor is located on the throttle body.
REMOVAL
(1) Remove air duct and air resonator box at throttle body.
(2) Disconnect electrical connector from IAC motor (Fig. 20).
(3) Remove two mounting bolts (screws) (Fig. 21).
(4) Remove IAC motor from throttle body.
INSTALLATION
(1) Install IAC motor to throttle body.
(2) Install and tighten two mounting bolts (screws) to 7 N*m (60 in. lbs.) torque.
(3) Install electrical connector.
(4) Install air duct/air box to throttle body.