Toyota
Dodge Durango
 Service Manual
Cooling System » Description and operation
Hose clamps

DESCRIPTION

The cooling system utilizes both worm drive and spring type hose clamps. If a spring type clamp replacement is necessary, replace with the original Mopart equipment spring type clamp.

CAUTION: A number or letter is stamped into the tongue of constant tension clamps. If replacement is necessary, use only a original equipment clamp with matching number or letter (Fig. 16).

OPERATION

The worm type hose clamp uses a specified torque value to maintain proper tension on a hose connection.

Fig. 16 Spring Clamp Size Location Fig. 16 Spring Clamp Size Location

1 - SPRING CLAMP SIZE LOCATION

The spring type hose clamp applies constant tension on a hose connection. To remove a spring type hose clamp, only use constant tension clamp pliers designed to compress the hose clamp.

    More about «Description and operation»:

    Cooling system

    Coolant reserve/overflow system

    Thermostat-5.2L/5.9L engines

    Thermostat-4.7L engine

    Radiator pressure cap

    Radiator

    Water pump

    Water pump bypass-4.7L

    Water pump bypass hose-5.2L/5.9L engines

    Automatic transmission oil coolers

    Automatic belt tensioner

    Block heater

    Hose clamps

    Viscous fan drive

    Dodge Durango Service Manual / Cooling System / Description and operation / Hose clamps

    Dodge Durango Service Manual

    Categories


    © 2017-2024 Copyright www.dodurango.net
    0.0078