REMOVAL
(1) Raise and support the front wheel.
(2) Remove the front wheel.
(3) Remove wheel opening molding.
Fig. 11 Hood Seal
1 - INNER HOOD PANEL
2 - HOOD PANEL
(4) Remove plastic rivets attaching wheelhouse liner to wheelhouse (Fig. 12).
(5) Separate liner from vehicle.
Fig. 12 Front Wheelhouse Liner
1 - FENDER SPLASH SHIELD
2 - INNER FENDER
3 - INNER FENDER
4 - WHEELHOUSE LINER
5 - FENDER SPLASH SHIELD
6 - PLASTIC RIVET
7 - PLASTIC RIVET
8 - WHEELHOUSE LINER
9 - INNER FENDER
10 - WHEELHOUSE LINER
11 - PLASTIC RIVET
INSTALLATION
(1) Position liner in wheelhouse.
(2) Install plastic rivets attaching wheelhouse liner to wheelhouse.
(3) Install wheel opening molding.
(4) Install the front wheel.
(5) Remove the support and lower the vehicle.