REMOVAL
(1) If equipped, remove floor console.
(2) Remove front seats, if necessary.
(3) Remove bolt attaching buckle to seat track (Fig. 89).
(4) Separate buckle from seat track.
Fig. 89 Seat Belt Buckle
1 - ANCHOR BOLT
2 - SEAT TRACK
3 - SEAT CUSHION
4 - BUCKLE
INSTALLATION
(1) Position buckle on seat track.
(2) Install bolt attaching buckle to seat track.
Tighten the bolt to 23 N*m (17 ft. lbs.) torque. Buckle should be free to partially pivot fore and aft after the bolt is torqued.
(3) Install seats, if removed.
(4) If removed, install floor console.