Toyota
Dodge Durango
 Owners Manual
Maintaining your vehicle » Bulb replacement
Front Fog Lamps

  1. Reach through the cutout in the splash shield and rotate the bulb's electrical connector one-quarter turn counterclockwise and remove it from the fog lamp housing.
  2.  Remove the bulb from the connector and install the replacement bulb.
  3.  Install the bulb and connector assembly into the fog lamp housing and rotate the connector one-quarter turn clockwise to lock it in place.
CAUTION!
  •  Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. If the bulb comes in contact with any oily surface, clean the bulb with rubbing alcohol.
  •  Always use the correct bulb size and type for replacement. An incorrect bulb size or type may overheat and cause damage to the lamp, the socket or the lamp wiring.

Rear Tail, Stop And Turn Signal Lamps

The rear tail, stop, and turn signal lamps are LED. See your authorized dealer for replacement.

    More about «Bulb replacement»:

    High Intensity Discharge Headlamps (Bi-Xenon) - If Equipped

    Bi-Halogen Headlamps - If Equipped

    Front Turn Signal

    Front Fog Lamps

    Rear Liftgate Mounted Back-up Lamps

    Dodge Durango Owners Manual / Maintaining your vehicle / Bulb replacement / Front Fog Lamps

    Dodge Durango Owners Manual

    Categories


    © 2017-2024 Copyright www.dodurango.net
    0.0586