REMOVAL
(1) Using a small flat blade, remove forward and rearward cup holder inserts.
(2) Remove screws attaching floor console to floor pan (Fig. 98).
(3) Disconnect wire harness for rear HEVAC blower, if equipped.
(4) Lift console upward and disengage from HEVAC duct, if equipped.
(5) Separate console from vehicle.
INSTALLATION
(1) Position console in vehicle.
(2) Engage HEVAC duct to console, if equipped.
(3) Connect wire harness for rear HEVAC blower, if equipped.
Fig. 98 Floor Console
1 - CUP HOLDER INSERT
2 - CUP HOLDER INSERT
3 - FLOOR CONSOLE
4 - HEVAC DUCT
5 - FLOOR PAN
6 - SHIFT BEZEL
(4) Install screws attaching floor console to floor pan (Fig. 98).
(5) Install forward and rearward cup holder inserts.