Dodge Durango

 Service Manual

Body » Seats » Removal and installation
Center armrest/console inertia latch cover

REMOVAL

1) Move the drivers seat position to full forward with seat back full forward.

(2) Place center arm rest in the down position.

(3) Remove the screw securing the cover to the inertia latch (Fig. 5).

(4) Remove the upper and lower inertia latch covers.

Fig. 5 Armrest/Console Inertia Latch Cover

1 - SEAT CUSHION

2 - SEAT BACK/CONSOLE LID

3 - HINGE COVER

INSTALLATION

(1) Install the upper latch cover onto the upper latch inertia arm. Ensure the check strap loops under the stud on the side of the lower stanchion/ post.

(2) Install the lower latch cover onto the inertia latch upper arm working it around the latch bracket.

(3) Align the lower latch cover, the upper latch cover, and the latch bracket to the screw hole on the arm.

(4) Secure the cover with the screw and tighten to 4.15N*m (37 in. lbs.).

(5) Cycle the armrest through a full range of travel and check for freedom of movement. Adjust the latch covers as necessary.

Side shield

Towel bar

Bucket seat track

Bucket seat back cover/cushion

Bucket seat cushion/cover

Center seat/console

Center armrest/console inertia latch cover

Center seat cushion/cover

2Nd row seat back

2Nd row seat back cover

2Nd row seat cushion cover

2Nd row seat cushion

2Nd row seat latches

2Nd row center seat cushion cover

2Nd row center seat cushion

2Nd row center seat back

2Nd row center seat back cover

3Rd row seat cushion cover

3Rd row seat cushion frame

Head restraint sleeve

3Rd row seat back

3Rd row seat back cover