Dodge Durango (DN) 1998-2003 Service Manual » Fuel System » Fuel injection system » Description and operation »
Ccd bus (+/-) circuits-pcm outputs. Data link connector-pcm input and output
OPERATION The Powertrain Control Module (PCM) sends certain
output signals through the CCD bus circuits.
These signals are used to control certain instrument
panel located items and to determine certain identification
numbers.
Refer to Group 8E, Instrument Panel and Gauges
for additional information. DESCRIPTION The data link connector is located at the lower
edge of the instrument panel near the steering column. OPERATION The 16-way data link connector (diagnostic scan
tool connector) links the Diagnostic Readout Box
(DRB) scan tool or the Mopar Diagnostic System
(MDS) with the Powertrain Control Module (PCM).Ccd bus (+/-) circuits-pcm outputs
Data link connector-pcm input and output
Dodge Durango (DN) 1998-2003 Service Manual
- Lubrication and Maintenance
- Suspension
- Differential and Driveline
- Brakes
- Cooling System
- Battery
- Starting Systems
- Charging System
- Ignition System
- Instrument Panel Systems
- Audio Systems
- Horn Systems
- Speed Control System
- Turn Signal and Hazard Warning Systems
- Wiper and Washer Systems
- Lamps
- Passive Restraint Systems
- Electrically Heated Systems
- Power Distribution System
- Power Lock Systems
- Vehicle Theft/Security Systems
- Power Seat System
- Power Window Systems
- Power Mirror Systems
- Chime/Buzzer Warning Systems
- Overhead Console Systems
- Engine
- Exhaust System
- Frame and Bumpers
- Fuel System
- Steering
- Transmission and Transfer Case
- Tires and Wheels
- Body
- Heating and Air Conditioning
- Emission Control Systems
- Introduction
Categories
© 2017-2024 Copyright www.dodurango.net