Bucket seat cushion/cover. Center seat/console

Bucket seat cushion/cover

NOTE: CLOTH TRIM IS BONDED TO THE CUSHION FOAM

REMOVAL

(1) Remove the anchor bolt attaching the seat belt to the seat track (Fig. 3).

(2) Remove seat.

(3) Remove the screw attaching the recliner handle to the recliner mechanism.

(4) Remove seat side shield and disconnect wire harness.

(5) Disengage the rearward J-straps.

(6) Disengage both side J-straps.

(7) Disengage the front J-strap.

(8) Disengage hook and loop fasteners.

(9) Separate the cushion/cover from the frame.

INSTALLATION

(1) Install anti-squeak sheet.

(2) Position the cushion/cover on the frame.

(3) Engage the front J-strap.

(4) Engage the side J-straps.

(5) Engage the rearward corner J-straps.

(6) Engage hook and loop fasteners.

(7) Engage the rear J-strap.

(8) Install the recliner handle.

(9) Install seat. Tighten the front seat track bolts to 22-34 N*m (16-25 ft. lbs.). Tighten the rear seat track bolts to 89-140 N*m (66-103 ft lbs.).

Fig. 3 Buckle Anchor Bolt

1 - ANCHOR BOLT

2 - SEAT TRACK

3 - SEAT CUSHION

4 - BUCKLE

(10) Install the anchor bolt attaching the belt to the seat track. Tighten the bolt to 40 N*m (29 ft.

lbs.).

Bucket seat recliner

The bucket seat recliner is included with the seat assembly. If service is needed, replace the seat assembly.

Center seat/console

CAUTION: MARK BOLT HEAD POSITION PRIOR TO DISASSEMBLY. FAILURE TO MAINTAIN PROPER TRACK SPACING MAY RESULT IN HIGH TRACK EFFORTS.

REMOVAL

(1) Remove bucket seats (2) Remove the bolts attaching the center seat to the bucket seat inboard seat tracks (Fig. 4).

(3) Route the seat belt buckles through the elastic retaining straps.

(4) Separate the center seat/armrest from the bucket seats.

INSTALLATION

(1) Position the center seat/armrest onto the bucket seat inboard seat tracks.

(2) Route the seat belt buckles through the elastic retaining straps.

(3) Install the bolts attaching the center seat to the bucket seat inboard tracks. Tighten the bolts to 24 N*m (17 ft. lbs.) torque.

(4) Install bucket seats

Fig. 4 Center Seat/Armrest

1 - DRIVERS SEAT

2 - PASSENGER SEAT

3 - CENTER SEAT

4 - BOLTS