B-pillar trim. C-pillar trim

B-pillar trim

REMOVAL

The upper B-pillar trim is attached to the B-pillar with spring clip retainers. The lower B-pillar trim is attached with screws and spring clip retainers. (Fig.

82).

(1) Remove front seat belt turning loop cover and turning loop.

(2) Grasp upper B-pillar trim and pull outward to release spring clip retainers.

(3) Remove door sill trim front and rear.

(4) Remove lower B-pillar trim screws.

(5) Grasp lower B-pillar trim and pull outward to release spring clip retainers.

(6) Route shoulder belt through access slot in lower B-pillar trim.

(7) Separate lower B-pillar trim from vehicle.

INSTALLATION

(1) Position lower B-pillar trim on vehicle.

(2) Route shoulder belt through access slot in lower B-pillar trim.

(3) Press lower B-pillar trim inward to engage spring clip retainers.

(4) Position upper B-pillar trim on vehicle.

(5) Press upper B-pillar trim inward to engage spring clip retainers.

(6) Install B-pillar trim screws.

(7) Install door sill trim front and rear.

(8) Install front seat belt turning loop, and torque bolt to 39N*m (29 ft. lbs.). Install turning loop cover.

Fig. 82 B-Pillar Trim Fig. 82 B-Pillar Trim

1 - TURNING LOOP

2 - ADJUSTER

3 - UPPER B-PILLAR TRIM

4 - B-PILLAR

5 - ANTI-RATTLE CUP

6 - ANCHOR BOLT

7 - LOWER B-PILLAR TRIM

8 - RETRACTOR

C-pillar trim

REMOVAL

(1) Remove cover and bolt attaching 2nd row seat belt turning loop to C-pillar.

(2) Grasp C-pillar trim and pull outward to disengage spring clips.

(3) Separate C-pillar trim from C-pillar (Fig. 83).

INSTALLATION

(1) Position C-pillar trim on C-pillar (Fig. 83).

(2) Align Spring clips and press into place.

(3) Install bolt attaching 2nd row seat belt turning loop to C-pillar. Tighten bolt to 39 N*m (29 ft. lbs.) torque. Install turning loop cover.

    Dodge Durango (DN) 1998-2003 Service Manual

    Categories


    © 2017-2024 Copyright www.dodurango.net