Dodge Durango

 Owners Manual

Understanding the features of your vehicle » Lights
Automatic High Beam - If Equipped

The Automatic High Beam Headlamp Control system provides increased forward lighting at night by automating high beam control through the use of a digital camera mounted on the inside rearview mirror. This camera detects vehicle specific light and automatically switches from high beams to low beams until the approaching vehicle is out of view.

NOTE:

•  The Automatic High Beam Headlamp Control can be turned on or off using the Uconnect System. Refer to "Uconnect Settings" in "Understanding Your Instrument Panel" for further information.
•  Broken, muddy, or obstructed headlights and taillights of vehicles in the field of view will cause headlights to remain on longer (closer to the vehicle). Also, dirt, film, and other obstructions on the windshield or camera lens will cause the system to function improperly.
•  To opt out of the Advanced Auto High-Beam Sensitivity Control (default) and enter Reduced High-Beam Sensitivity Control (not recommended), toggle highbeam lever 6 full on/off cycles within 10 seconds of ignition ON. System will return to default setting upon ignition off.

If the windshield or Automatic High Beam Headlamp Control mirror is replaced, the mirror must be re-aimed to ensure proper performance. See your local authorized dealer.

Headlight Switch

Automatic Headlights

Headlights On Automatically With Wipers

Automatic High Beam - If Equipped

Daytime Running Lights - If Equipped

Headlight Delay

Fog Lights - If Equipped

Interior Lights

Battery Saver

Front Map/Reading Lights - If Equipped

Courtesy Lights

Ambient Light - If Equipped

Multifunction Lever

Turn Signals

Lane Change Assist