CAUTION: Inspect the condition of the shoulder belt and lap belt. Replace any belt that is cut, frayed, torn, or damaged in any way. Also, replace the shoulder belt if the retractor is either damaged or inoperative.
REMOVAL
1) Remove 3rd row seat.
(2) Remove quarter panel trim.
(3) Remove screws attaching belt guide to D-pillar.
(4) Remove bolt attaching retractor to D-pillar (Fig. 92).
(5) Separate retractor from vehicle.
INSTALLATION
(1) Position retractor on D-pillar.
(2) Install bolt attaching retractor to D-pillar (Fig.
92). Tighten bolt to 39 N*m (29 ft. lbs.) torque.
(3) Install screws attaching belt guide to D-pillar.
(4) Install quarter panel trim.
(5) Install 3rd row seat.
Fig. 90 2nd Row Retractor
1 - ADJUSTER
2 - C-PILLAR TRIM
3 - TURNING LOOP
4 - QUARTER PANEL TRIM
5 - ANCHOR BOLT
6 - BELT ANCHOR
7 - ANTI-RATTLE CUP
8 - RETRACTOR
9 - C-PILLAR
Fig. 91 2nd Row Seat Belt/Buckle
1 - BUCKLE ANCHOR
2 - FLOOR PAN
3 - REAR SEAT (2ND SEAT)
Fig. 92 3rd Row Seat Belt Retractor
1 - D-PILLAR
2 - RETRACTOR
3 - ANTI-RATTLE CUP
4 - BUCKLE
5 - ANCHOR BOLT
6 - STUD
7 - BELT ANCHOR
8 - TURNING LOOP
9 - D-PILLAR TRIM