Toyota
Dodge Durango
 Service Manual
Lamps » Lamp service » Removal and installation
2Nd seat dome/reading lamp

REMOVAL

1) Using a small flat blade, pry the center rearward edge of the dome/reading lamp lens downward from lamp (Fig. 12).

(2) Allow the lens to hang down this will disengage the forward edge of the lamp from the headliner.

(3) Pull the forward edge of the lamp down and slide the lamp forward.

(4) Separate the lamp from the headliner.

(5) Disengage lamp wire connector from body wire harness.

(6) Separate lamp from vehicle (Fig. 13).

Fig. 12 Lamp Lens Fig. 12 Lamp Lens

1 - FLAT BLADE

2 - LENS

Fig. 13 Dome/Reading Lamp Fig. 13 Dome/Reading Lamp

1 - HEADLINER

2 - DOME/READING LAMP

INSTALLATION

(1) Position lamp at headliner.

(2) Connect lamp wire connector to body wire harness.

(3) Position the rearward edge of the lamp in the headliner opening and slide lamp rearward.

(4) Push the forward edge of the lamp in the headliner opening and push the lamp lens up into the lamp to secure.

    More about «Removal and installation»:

    Headlamp

    Fog lamp

    Park, turn signal and side marker lamp

    Center high mounted stop lamp (chmsl)

    Liftgate/cargo lamp

    Tail, brake, turn signal and back-up lamp

    License plate lamp

    Underhood lamp

    Dome lamp

    2Nd seat dome/reading lamp

    Overhead console reading lamp

    Dodge Durango Service Manual / Lamps / Lamp service / Removal and installation / 2Nd seat dome/reading lamp

    Dodge Durango Service Manual

    Categories


    © 2017-2024 Copyright www.dodurango.net
    0.019