The 2nd row seat is removed as a complete assembly.
REMOVAL
(1) Move seat to the forward tumble position.
(2) Remove outboard bolts attaching seat to the floor pan (Fig. 95).
(3) Remove inboard bolts attaching seat belt buckle anchors and seat to floor pan (Fig. 96).
(4) Remove seat from the vehicle.
INSTALLATION
(1) Position seat in the vehicle.
(2) Install inboard bolts attaching seat belt buckle anchors and seat to floor pan (Fig. 96). Tighten bolts to 95 N*m (70 ft. lbs.) torque.
Fig. 96 2nd Row Seat Belt Anchors
1 - BUCKLE ANCHOR
2 - FLOOR PAN
3 - REAR SEAT (2ND SEAT)
(3) Install outboard bolts attaching seat to the floor pan (Fig. 95). Tighten bolts to 27 N*m (20 ft.
lbs.) torque.
(4) Move and latch seat in the seating position.