Dodge Durango Service ManualFrame and Bumpers » Removal and installation
Transfer case skid plate
Dodge Durango
Service Manual
Transfer case skid plate
REMOVAL
(1) Hoist and support vehicle on safety stands.
(2) Remove bolts attaching skid plate to crossmembers (Fig. 4).
(3) Separate skid plate from vehicle.
INSTALLATION
(1) Position skid plate on vehicle.
(2) Install bolts attaching skid plate to crossmembers.
Tighten to 23 N*m (17 ft. lbs.) torque.
(3) Remove safety stands and lower vehicle.
More about «Removal and installation»:
Front axle skid plate
Transfer case skid plate
Fuel tank skid plate-4wd vehicles
Spare tire winch
Trailer hitch
Specifications
Dodge Durango Service Manual / Frame and Bumpers / Removal and installation / Transfer case skid plate
Dodge Durango Service Manual
- Lubrication and Maintenance
- Suspension
- Differential and Driveline
- Brakes
- Cooling System
- Battery
- Starting Systems
- Charging System
- Ignition System
- Instrument Panel Systems
- Audio Systems
- Horn Systems
- Speed Control System
- Turn Signal and Hazard Warning Systems
- Wiper and Washer Systems
- Lamps
- Passive Restraint Systems
- Electrically Heated Systems
- Power Distribution System
- Power Lock Systems
- Vehicle Theft/Security Systems
- Power Seat System
- Power Window Systems
- Power Mirror Systems
- Chime/Buzzer Warning Systems
- Overhead Console Systems
- Engine
- Exhaust System
- Frame and Bumpers
- Fuel System
- Steering
- Transmission and Transfer Case
- Tires and Wheels
- Body
- Heating and Air Conditioning
- Emission Control Systems
- Introduction
Categories
© 2017-2024 Copyright www.dodurango.net
0.0066
0.0066