Dodge Durango Service ManualSuspension » Front suspension - 4x4 » Description and operation
Torsion bars
Dodge Durango
Service Manual
Torsion bars
DESCRIPTION
The front of the bar mounts to the back side of the lower suspension arm. The rear end of the bar is mounted in a anchor that rests in the frame crossmember.
OPERATION
The torsion bars are used to control ride height and ride quality. The vehicle height is adjusted through an anchor adjustment bolt that increases or decreases the angle of the torsion bar. Increasing or decreasing the bar angle changes the angle of the suspension arms.
More about «Description and operation»:
Suspension components 4x4
Shock absorbers
Torsion bars
Steering knuckle
Suspension arms
Stabilizer bar
Dodge Durango Service Manual / Suspension / Front suspension - 4x4 / Description and operation / Torsion bars
Dodge Durango Service Manual
- Lubrication and Maintenance
- Suspension
- Differential and Driveline
- Brakes
- Cooling System
- Battery
- Starting Systems
- Charging System
- Ignition System
- Instrument Panel Systems
- Audio Systems
- Horn Systems
- Speed Control System
- Turn Signal and Hazard Warning Systems
- Wiper and Washer Systems
- Lamps
- Passive Restraint Systems
- Electrically Heated Systems
- Power Distribution System
- Power Lock Systems
- Vehicle Theft/Security Systems
- Power Seat System
- Power Window Systems
- Power Mirror Systems
- Chime/Buzzer Warning Systems
- Overhead Console Systems
- Engine
- Exhaust System
- Frame and Bumpers
- Fuel System
- Steering
- Transmission and Transfer Case
- Tires and Wheels
- Body
- Heating and Air Conditioning
- Emission Control Systems
- Introduction
Categories
© 2017-2023 Copyright www.dodurango.net
0.0459
0.0459