Dodge Durango

 Owners Manual

Starting and operating » Starting procedures » Normal Starting
To Turn On The Engine Using The ENGINE START/STOP Button

1. The transmission must be in PARK or NEUTRAL.
2.  Press and hold the brake pedal while pushing the ENGINE START/STOP button once.
3.  The system takes over and attempts to start the vehicle. If the vehicle fails to start, the starter will disengage automatically after 10 seconds.
4.  If you wish to stop the cranking of the engine prior to the engine starting, push the button again.

NOTE: Normal starting of either a cold or a warm engine is obtained without pumping or pressing the accelerator pedal.

To Turn On The Engine Using The ENGINE START/STOP Button

To Turn Off The Engine Using ENGINE START/STOP Button

ENGINE START/STOP Button Functions - With Driver's Foot OFF The Brake Pedal (In PARK Or NEUTRAL Position)