Dodge Durango
 Service Manual
Body » Body component service » Removal and installation

NOTE: All vehicles with driver and passenger side airbags must have a colored-coded, 5-bullet point airbag warning label applied to the sunvisor face surface (in the stored position). When replacing the sunvisor, verify label availability and ensure the label is installed.


(1) Remove the screws that attach the sunvisor arm support bracket to the headliner and the roof panel (Fig. 101).

(2) Disengage vanity lamp connector, if equipped.

(3) Detach the sunvisor from the visor supports.

(4) Remove the sunvisor from the headliner and roof panel.

(5) If necessary, grasp both sides of the visor support base and firmly pull outward to disengage the visor support cover from the base (Fig. 102).

(6) Lift/rock the visor support upward to disengage it from the roof panel.


(1) If removed, position visor support in roof panel.

(2) Push the visor support cover inward and secure the visor support to the roof panel.

(3) Position the sunvisor in the visor supports and align the arm support bracket holes with the headliner holes.

Fig. 101 Sunvisor Fig. 101 Sunvisor


Fig. 102 Sunvisor Support Fig. 102 Sunvisor Support




(4) Engage vanity lamp connector, if equipped.

(5) Install the screws that attach the sunvisor arm support bracket to the headliner and the roof panel.

    More about «Removal and installation»:



    Hood silencer pad

    Hood hinge

    Hood safety latch

    Hood latch striker

    Hood latch

    Hood release cable

    Cowl grille

    Cowl seal

    Hood seal

    Front wheelhouse liner

    Left front fender

    Right front fender

    Running board

    Exterior nameplates


    Side view mirror

    Front door trim panel

    Front door waterdam

    Front door

    Front door hinge

    Front door outside handle

    Front door lock cylinder

    Lock cylinders

    Front door latch

    Front door latch striker

    Front door inside handle actuator

    Front door inner belt weatherstrip

    Front door outer belt weatherstrip

    Front door glass

    Front door window regulator

    Front door lower glass run channels

    Front door glass run weatherstrip

    Front door opening weatherstrip

    Front door secondary seal

    Rear door trim panel

    Rear door waterdam

    Rear door

    Rear door hinge

    Rear door outside handle

    Rear door latch

    Rear door latch striker

    Rear door inner belt weatherstrip

    Rear door outer belt weatherstrip

    Rear door opening weatherstrip

    Rear door window regulator

    Rear door glass run weatherstrip

    Rear door glass run channels

    Rear door glass

    C-pillar seal

    Rear door secondary seal

    Roof rail weatherstrip and retainer

    Body side moldings

    Wheel opening molding

    Fuel filler door

    Rear wheel house liner

    Liftgate trim panel

    Liftgate hinge

    Liftgate support cylinder


    Liftgate outside handle

    Liftgate lock cylinder

    Liftgate latch

    Liftgate latch striker

    Liftgate opening weatherstrip

    Liftgate molding

    Luggage rack

    Cowl trim cover

    A-pillar grab handle

    A-pillar trim

    Door sill trim

    B-pillar trim

    C-pillar trim

    Liftgate opening upper trim

    D-pillar trim

    Quarter panel trim

    Liftgate scuff plate

    Front seat belt retractor

    Front seat belt buckle

    2Nd row seat belt retractor

    2Nd row seat belt buckle

    3Rd row seat belt retractor

    3Rd row seat belt buckle

    Bucket seat

    2Nd row seat

    3Rd row seat

    Floor console

    Floor carpet

    Rearview mirror

    Rearview mirror support bracket


    Coat hook

    Overhead assist handle


    Dodge Durango Service Manual / Body / Body component service / Removal and installation / Sunvisor

    Dodge Durango Service Manual


    © 2017-2024 Copyright