
Dodge Durango
Owners Manual
Understanding the features of your vehicle » Power sunroof - if equipped
Relearn Procedure
For vehicles equipped with a sunroof, there is a relearn
procedure that allows you to calibrate the sunroof when
the "Express Operation" feature stops working. To reset
the sunroof, follow these steps:
- Set the ignition to the ACC ON/RUN position.
- Ensure that the sunroof is in the Fully Closed position.
- Push and hold the Close switch. The sunroof will hit
the hard stop and move to the Vent position after 10
seconds.
- Release the Close switch, then push and hold the
Close switch again within 5 seconds to begin the
teaching process. The sunroof will complete one full
cycle and return to the Fully Closed position.NOTE: If the Close switch is released anytime during the
teach cycle, the procedure will need to be repeated
starting from the first step.
- Once the sunroof has stopped in the Fully Closed
position, release the Close switch. The sunroof is now
reset and ready to use.
More about «Power sunroof - if equipped»:
Relearn Procedure