The rear wiper/washer controls are located on the multifunction lever on the left side of the steering column.
The rear wiper/washer is operated by rotating a switch, located at the middle of the lever.
Rear Wiper/Washer Control
Rotate the center portion of the
lever upward to
the first detent for intermittent operation and to
the second detent for continuous rear wiper operation.
Rotating the center portion upward
once more
will activate the washer pump which will continue
to operate as long as the switch is held. Upon
release of the switch, the wipers will resume the continuous
rear wiper operation. When this rotary control is in
the OFF position, rotating it downward will activate the
rear washer pump which will continue to operate as long
as the switch is held. Once the switch is released it will
return to the OFF position and the wipers will cycle
several times before returning to the parked position.
NOTE: As a protective measure, the pump will stop if the switch is held for more than 20 seconds. Once the switch is released the pump will resume normal operation.
If the rear wiper is operating when the ignition is turned OFF, the wiper will automatically return to the "park" position.