REMOVAL
(1) Remove trim panel.
(2) Peel waterdam back to access latch.
(3) Disconnect latch rods from latch (Fig. 50).
(4) Disconnect the latch harness connector.
(5) Remove screws attaching latch to rear door (Fig. 51).
Fig. 50 Rear Door Latch Rods
1 - LATCH
2 - LATCH ROD
3 - LATCH ROD
4 - CONNECTOR
Fig. 51 Rear Door Latch
1 - REAR DOOR
2 - LATCH
INSTALLATION
(1) Connect the latch harness connector.
(2) Install screws attaching latch to rear door.
(3) Connect latch rods to latch.
(4) Install waterdam.
(5) Install trim panel.