Dodge Durango

 Owners Manual

Understanding the features of your vehicle » Driver memory seat - if equipped
Programming The Memory Feature

NOTE: To create a new memory profile, perform the following:

1.  Cycle the vehicles ignition to the ON/RUN position (Do not start the engine).
2. Adjust all memory profile settings to desired preferences (i.e., seat, side mirror, power tilt and telescopic steering column [if equipped], and radio station presets).
3.  Push and release the S (Set) button on the memory switch.
4.  Within five seconds, push and release either of the memory buttons (1) or (2). The Driver Information Display (DID) will display which memory position has been set.

NOTE:

•  Memory profiles can be set without the vehicle in PARK, but the vehicle must be in PARK to recall a memory profile.
•  To set a memory profile to your key fob, refer to "Linking And Unlinking The Remote Keyless Entry Key Fob To Memory" in this section.

Programming The Memory Feature

Linking And Unlinking The Remote Keyless Entry Key Fob To Memory

Memory Position Recall

Easy Entry/Exit Seat