Dodge Durango Service ManualDifferential and Driveline » Front axle driveshafts » Diagnosis and testing
Noise and/or vibration in turns
Dodge Durango
Service Manual
Noise and/or vibration in turns
A clicking noise and/or a vibration in turns could be caused by one of the following conditions:
- Damaged outer C/V or inner tripod joint seal boot or seal boot clamps. This will result in the loss and/or contamination of the joint grease, resulting in inadequate lubrication of the joint.
- Noise may also be caused by another component of the vehicle coming in contact with the driveshafts.
More about «Diagnosis and testing»:
Vehicle inspection
Noise and/or vibration in turns
Clunking noise during acceleration
Shudder or vibration during acceleration
Vibration at highway speeds
Dodge Durango Service Manual / Differential and Driveline / Front axle driveshafts / Diagnosis and testing / Noise and/or vibration in turns
Dodge Durango Service Manual
- Lubrication and Maintenance
- Suspension
- Differential and Driveline
- Brakes
- Cooling System
- Battery
- Starting Systems
- Charging System
- Ignition System
- Instrument Panel Systems
- Audio Systems
- Horn Systems
- Speed Control System
- Turn Signal and Hazard Warning Systems
- Wiper and Washer Systems
- Lamps
- Passive Restraint Systems
- Electrically Heated Systems
- Power Distribution System
- Power Lock Systems
- Vehicle Theft/Security Systems
- Power Seat System
- Power Window Systems
- Power Mirror Systems
- Chime/Buzzer Warning Systems
- Overhead Console Systems
- Engine
- Exhaust System
- Frame and Bumpers
- Fuel System
- Steering
- Transmission and Transfer Case
- Tires and Wheels
- Body
- Heating and Air Conditioning
- Emission Control Systems
- Introduction
Categories
© 2017-2023 Copyright www.dodurango.net
0.0504
0.0504