
Dodge Durango
Owners Manual
Things to know before starting your vehicle » Remote keyless entry (RKE)
Key Fob Battery Replacement
The recommended replacement battery is one CR2032
battery.
NOTE:
- Perchlorate Material - special handling may apply.Batteries could contain dangerous materials. Please
dispose of them according to respect for environment
and local laws.
- Used batteries are harmful to the environment. You
can dispose of them either in the correct containers as
specified by law or by taking them to an authorized
dealership, which will deal with their disposal.
- Do not touch the battery terminals that are on the back
housing or the printed circuit board.
- Remove the emergency key by sliding the mechanical
latch on the back of the key fob sideways with your
thumb and then pull the key out with your other
hand.
Separating Key Fob Case
A - Emergency Key Release Button
B - Remove The Emergency Key
- Insert the tip of the emergency key, #2 flat blade
screwdriver, or a coin into the slot and gently pry the
two halves of the key fob apart. Make sure not to
damage the seal during removal.
Separating Key Fob Case With Emergency Key
Separating Key Fob Case With A Coin
- Remove the battery by turning the back cover over
(battery facing downward) and tapping it lightly on a
solid surface such as a table or similar, then replace the
battery.
Replace Battery In The Key Fob
- Fit a new battery in place of the depleted battery.When replacing the battery, match the + sign on the
battery to the + sign on the inside of the back cover.Avoid touching the new battery with your fingers.Skin oils may cause battery deterioration. If you touch
a battery, clean it with rubbing alcohol.
- To assemble the key fob case, snap the two halves
together until they are tightly clamped.
More about «Remote keyless entry (RKE)»:
Key Fob Battery Replacement