Toyota
Dodge Durango
 Service Manual
Horn Systems » Diagnosis and testing
Horn

For complete circuit diagrams, refer to Horn/Cigar Lighter/Power Outlet in the Contents of Group 8W - Wiring Diagrams.

(1) Disconnect the wire harness connector(s) from the horn connector receptacle(s). Measure the resistance between the ground circuit cavity of the horn(s) wire harness connector(s) and a good ground. There should be no measurable resistance. If OK, go to Step 2. If not OK, repair the open ground circuit to ground as required.

(2) Check for battery voltage at the horn relay output circuit cavity of the horn(s) wire harness connector( s). There should be zero volts. If OK, go to Step 3.

If not OK, repair the shorted horn relay output circuit or replace the faulty horn relay as required.

(3) Depress the horn switch. There should now be battery voltage at the horn relay output circuit cavity of the horn(s) wire harness connector(s). If OK, replace the faulty horn(s). If not OK, repair the open horn relay output circuit to the horn relay as required.

    More about «Diagnosis and testing»:

    Horn switch

    Horn

    Dodge Durango Service Manual / Horn Systems / Diagnosis and testing / Horn

    Dodge Durango Service Manual

    Categories


    © 2017-2024 Copyright www.dodurango.net
    0.0171