Toyota
Dodge Durango
 Service Manual
Body » Seats » Removal and installation
Head restraint sleeve

NOTE: When removing the head restraint sleeves and guides, the retaining tabs on the sleeves will be damaged during the removal process. Check the availability of replacement parts before servicing.

REMOVAL

(1) Remove head restraint.

(2) Using a trim stick, pry head restraint sleeves and guides from seat back. (Fig. 15).

(3) Separate head restraint sleeves and guides from seat back and discard.

Fig. 15 Head Restrain Sleeve Fig. 15 Head Restrain Sleeve

1 - HEAD RESTRAINT SLEEVE

2 - SEAT BACK

3 - TRIM STICK

INSTALLATION

(1) Position new head restraint sleeves and guides in seat back (2) Rotate head restraint sleeve until aligned with slot in the guide and press downward to secure.

Ensure head restraint sleeve is anchored securely.

(3) Install head restraint.

    More about «Removal and installation»:

    Side shield

    Towel bar

    Bucket seat track

    Bucket seat back cover/cushion

    Bucket seat cushion/cover

    Center seat/console

    Center armrest/console inertia latch cover

    Center seat cushion/cover

    2Nd row seat back

    2Nd row seat back cover

    2Nd row seat cushion cover

    2Nd row seat cushion

    2Nd row seat latches

    2Nd row center seat cushion cover

    2Nd row center seat cushion

    2Nd row center seat back

    2Nd row center seat back cover

    3Rd row seat cushion cover

    3Rd row seat cushion frame

    Head restraint sleeve

    3Rd row seat back

    3Rd row seat back cover

    Dodge Durango Service Manual / Body / Seats / Removal and installation / Head restraint sleeve

    Dodge Durango Service Manual

    Categories


    © 2017-2024 Copyright www.dodurango.net
    0.0226