Toyota
Dodge Durango
 Service Manual
Frame and Bumpers » Bumpers » Removal and installation
Front bumper inner bracket

REMOVAL

(1) Remove bolts attaching top of bumper to bumper bracket.

(2) Remove nuts attaching inner bumper bracket to frame (Fig. 1).

(3) Using a shallow socket and extension or equivalent, tap with a hammer to drive inner bumper bracket studs out of frame.

(4) Separate inner bumper bracket from frame.

INSTALLATION

(1) Position inner bumper bracket studs into frame.

(2) Install nuts attaching inner bumper bracket to frame. Tighten nuts to 94 N*m (70 ft. lbs.) torque.

(3) Install bolts attaching top of bumper to bumper bracket.

    More about «Removal and installation»:

    Front bumper

    Front bumper inner bracket

    Front bumper fascia

    Rear bumper

    Rear bumper fascia

    Dodge Durango Service Manual / Frame and Bumpers / Bumpers / Removal and installation / Front bumper inner bracket

    Dodge Durango Service Manual

    Categories


    © 2017-2024 Copyright www.dodurango.net
    0.006