Toyota
Dodge Durango
 Service Manual
Differential and Driveline » C205F axle » Removal and installation
Axle shaft seal and bearing

REMOVAL

(1) Remove the axle shaft.

(2) Remove the axle shaft seal from the end of the axle shaft tube with a small pry bar.

NOTE: The seal and bearing can be removed at the same time with the bearing removal tool.

(3) Remove the axle shaft bearing from the axle tube with Bearing Removal Tool C-4660-A.

(4) Inspect the axle shaft tube bore for roughness and burrs. Remove as necessary.

INSTALLATION

Do not install the original axle shaft seal.

Always install a new seal.

(1) Wipe the axle shaft tube bore clean.

(2) Install axle shaft bearing with Installer 5063 and Handle C-4171.

(3) Install the new axle shaft seal with Installer 8402 and Handle C-4171.

(4) Install the axle shaft.

    More about «Removal and installation»:

    Front axle

    Pinion shaft seal

    Axle shaft

    Axle shaft seal and bearing

    Differential

    Differential side bearings

    Ring gear

    Pinion gear

    Final assembly

    Dodge Durango Service Manual / Differential and Driveline / C205F axle / Removal and installation / Axle shaft seal and bearing

    Dodge Durango Service Manual

    Categories


    © 2017-2024 Copyright www.dodurango.net
    0.0217